LDAP-UX Client Services B.04.15 with Microsoft Windows Active Directory Server Administrator's Guide (edition 8)
Table Of Contents
- LDAP-UX Client Services B.04.15 with Microsoft Windows Active Directory Administrator's Guide
- Table of Contents
- Preface
- 1 Introduction
- 2 Installing LDAP-UX Client Services
- Before You Begin
- Summary of Installing and Configuring LDAP-UX Client Services
- Planning Your Installation
- Installing LDAP-UX Client Services on a Client
- Configuring Active Directory for HP-UX Integration
- Step 1: Install Active Directory
- Step 2: Install SFU 2.0, 3.0 or 3.5 including Server for NIS
- Step 3: Create a Proxy User
- Step 4: Add an HP-UX Client Machine Account to Active Directory
- Step 5: Use ktpass to Create the Keytab File for the HP-UX client machine
- Step 6: Add POSIX Attributes into the Global Catalog
- Importing Name Service Data into Your Directory
- Configuring LDAP-UX Client Services
- Step 1: Run the Setup Program
- Step 2: Install the PAM Kerberos Product
- Step 3: Configure Your HP-UX Machine to Authenticate Using PAM Kerberos
- Step 4: Configure the Name Service Switch (NSS)
- Step 5: Configure the PAM Authorization Service Module (pam_authz)
- Step 6: Configure the Disable Login Flag
- Step 7: Verify LDAP-UX Client Services for Single Domain
- Step 8: Configure Subsequent Client Systems
- Configuring the LDAP-UX Client Services with SSL or TLS Support
- Downloading the Profile Periodically
- 3 Active Directory Multiple Domains
- 4 LDAP-UX Client Services with AutoFS Support
- 5 LDAP Printer Configurator Support
- 6 Dynamic Group Support
- 7 Administering LDAP-UX Client Services
- Using the LDAP-UX Client Daemon
- Integrating with Trusted Mode
- SASL GSSAPI Support
- PAM_AUTHZ Login Authorization
- Policy And Access Rules
- How Login Authorization Works
- PAM_AUTHZ Supports Security Policy Enforcement
- Policy File
- Policy Validator
- Dynamic Variable Support
- Constructing an Access Rule in pam_authz.policy
- Static List Access Rule
- Dynamic Variable Access Rule
- Security Policy Enforcement with Secure Shell (SSH) or r-commands
- Adding Additional Domain Controllers
- Adding Users, Groups, and Hosts
- User and Group Management
- Displaying the Proxy User's Distinguished Name
- Verifying the Proxy User
- Creating a New Proxy User
- Displaying the Current Profile
- Creating a New Profile
- Modifying a Profile
- Changing Which Profile a Client is Using
- Creating an /etc/krb5.keytab File
- Considering Performance Impacts
- Client Daemon Performance
- Troubleshooting
- 8 Modifying User Information
- 9 Mozilla LDAP C SDK
- A Configuration Worksheet
- B LDAP-UX Client Services Object Classes
- C Command, Tool, Schema Extension Utility, and Migration Script Reference
- LDAP-UX Client Services Components
- Client Management Tools
- LDAP User and Group Management Tools
- Environment Variables
- Return Value Formats
- Common Return Codes
- The ldapuglist Tool
- The ldapugadd Tool
- The ldapugmod Tool
- The ldapugdel Tool
- The ldapcfinfo Tool
- LDAP Directory Tools
- Schema Extension Utility
- Name Service Migration Scripts
- Unsupported Contributed Tools and Scripts
- D Sample PAM Configuration File
- E Sample /etc/krb5.conf File
- F Sample /etc/pam.conf File for HP-UX 11i v1 Trusted Mode
- G Sample /etc/pam.conf File for HP-UX 11i v2 Trusted Mode
- H Sample PAM Configuration File for Security Policy Enforcement
- Glossary
- Index
./beq -k d -s pwd -l /usr/lib/hpux32/libnss_ldap.so.1 102
• An example beq command using group name igrp1 as the search key, grp (group) as the
service, and ldap as the library on the 32 bit of an HP-UX 11i v1, v2 or v3 PA machine is
shown below:
./beq -k n -s grp -l /usr/lib/libnss_ldap.1 igrp1
nss_status.............. NSS_SUCCESS
gr_name...........(igrp1)
gr_passwd.........(*)
gr_gid............(21)
pw_age............()
gr_mem
(iuser1)
(iuser2)
(iuser3)
Use the following beq command if you run on the 64 bit of an HP-UX 11i v2 or v3 IA machine:
./beq -k n -s grp -l /usr/lib/hpux64/libnss_ldap.so.1 igrp1
Use the following beq command if you run on the 32 bit of an HP-UX 11i v2 or v3 IA machine:
./beq -k n -s grp -l /usr/lib/hpux32/libnss_ldap.so.1 igrp1
• An example beq command using gid number 22 as the search key, grp (group) as the
service, and ldap as the library on the 32 bit of an HP-UX 11i v1, v2 or v3 PA machine is
shown below:
./beq -k d -s grp -l /usr/libnss_ldap.l 22
nss_status.............. NSS_SUCCESS
gr_name...........(igrp2)
gr_passwd.........(*)
gr_gid............(22)
pw_age............()
gr_mem
(iuser1)
Use the following beq command if you run on the 64 bit of an HP-UX 11i v2 or v3 IA machine:
./beq -k d -s grp -l /usr/lib/hpux64/libnss_ldap.so.l 22
Use the following beq command if you run on the 32 bit of an HP-UX 11i v2 or v3 IA machine:
./beq -k d -s grp -l /usr/lib/hpux32/libnss_ldap.so.l 22
Certutil — Certificate Database Tool
You can use the certutil command-line utility to create and modify the Netscape Communicator
cert8.db and key3.db database files. This tool can also list, generate, modify, or delete certificates
within the cert7.db file. You can also use this tool to create, change the password, generate new
public and private key pairs, display the contents of the key database, or delete key pairs within
the key3.db file. For detailed command options and their arguments, see Using the Certificate
Database Tool available at http://www.mozilla.org/projects/security/pki/nss/tools/certutil.html.
uid2dn — Display User's Distinguished Name Tool
This tool, found in /opt/ldapux/contrib/bin, displays the user's Distinguish Name (DN)
information for a given UID.
Syntax
uid2dn [UID]
where UID is a user's UID information.
262 Command, Tool, Schema Extension Utility, and Migration Script Reference