LDAP-UX Client Services B.04.15 Administrator's Guide

[printers] Any printer setting defined here will be used by the LDAP printer
configurator.
start=<yes|no>
Determines if the printer configurator service will start when
ldapclientd is initialized. If it is enabled, the printer configurator will
start when ldapclientd is initialized. By default, the start parameter
is enabled.
search_interval=<1800-1209600>
Defines the interval, in seconds, before the printer configurator performs
a printer search in the directory server. The default value is 86400 (in
seconds). The minimum value is 1800 (30 minutes) and the maximum
value is 1209600 (2 weeks).
max_printers= 50 (default value)
Defines the maximum printer objects that printer configurator services
will handle. For example, a number of 100 printer entries is returned to
the printer configurator after a scheduled printer search. If the
max_printers value is set to 50, only the first 50 printer entries received
by the printer configurator will be processed. For this configuration
parameter, the value must be greater than 0 and the maximum value is
unlimited. The default value is 50.
lpadmin_option
Defines the lpadmin options. Do not include the-p, -orm and -orp
options in the option fields. The LDAP printer configurator provides
the required information of printer name (-p), remote machine name
(-orm) and remote printer name (-orp) during the run time. Do not
include any other parameters, such as stderr or stdout redirection
options. If the option fields of the lpadmin_option parameter are
empty or the lpadmin_option parameter does not exist, the default
lpadmin options are used. By default, lpadmin_option=-mrmodel
-v/dev/null -ocmrcmodel -osmrsmodel.
Refer to the lpadmin man page for detailed information about allowed
options and the syntax.
5.1.3.3 Configuration File
The LDAP client configuration file is automatically loaded when the product is installed. Refer
to the man page for additional information.
If you update LDAP-UX Client Services from an older version, such as B.03.00 or B.03.10, the
new configuration file will be /opt/ldapux/newconfig/etc/opt/ldapux/ldapclientd.conf.
5.2 Integrating with Trusted Mode
This section describes features and limitations, PAM configuration changes and configuration
parameter for integrating LDAP-UX with Trusted Mode.
5.2.1 Overview
LDAP-UX Client Services B.03.30 or later supports coexistence with Trusted Mode. This means
that local-based accounts can benefit from the Trusted Mode security policies, while LDAP-based
accounts benefit from the security policies offered by the LDAP server. This release of LDAP-UX
also enables LDAP-based and local-based accounts to be audited on the Trusted Mode.
5.2 Integrating with Trusted Mode 91