LDAP-UX Client Services B.04.15 Administrator's Guide

cache_cleanup_time=<1-300>
The interval, in seconds, between the times when ldapclientd
identifies and cleans up stale cache entries.
The default value is 10.
update_ldapux_conf_time=<10-2147483647>
This determines how often, in seconds, ldapclientd re-reads the
/etc/opt/ldapux/ldapux_client.conf client configuration file to download
new domain profiles.
The default value is 600 (10 minutes).
cache_size=<102400-1073741823>
The maximum number of bytes that should be cached by ldapclientd
for all services except dynamic_group. This value is the maximum, upper
limit, of memory that can be used by ldapclientd for all services
except dynamic_group. If this limit is reached, new entries are not cached
until enough expired entries are freed to allow it.
The default value is 10000000.
state_dump_time=<0-2147483647>
As state, functions like a virtual between the client and LDAP server, is
created for setXXent() request, and stays for the subsequent
getXXent() requests. If no get requests are received in the specified
time interval (in seconds), the state will be removed. The default value
is 300 (in seconds).
max_enumeration_states=<0-95>[%]
The maximum number of states that ldapclientd allows. It means
the number of enumeration ldapclientd will handle simultaneously.
This number must be less than max_conn and it is configured as a
percentage of max_conn. The minimum value is 0% and maximum value
is 95%. The default value is 80%. A value of 0% disables enumeration.
poscache_ttl=<1-2147483647>
The time, in seconds, before a cache entry expires from the positive
cache. There is no [general] default value for this setting. Each cache
section has its own default values (listed below). Specifying a value
under [general] will override poscache_ttl defaults in other
sections (where there is no specific poscache_ttl definitions for that
section).
negcache_ttl=<1-2147483647>
The time, in seconds, before a cache entry expires from the negative
cache. There is no [general] default value for this setting. Each cache
section has its own default value.
[passwd]
Cache settings for the passwd cache (which caches name, uid and
shadow information).
enable=<yes|no>
ldapclientd only caches entries for this section, when it is enabled.
If the cache is not enabled, ldapclientd will query the directory server
for any entry request from this section. Since this impacts LDAP-UX
client performance and response time, by default, caching is enabled.
poscache_ttl=<0-2147483647>
5.1 Using The LDAP-UX Client Daemon 87