LDAP-UX Client Services B.04.15 Administrator's Guide

2 Installing And Configuring LDAP-UX Client Services
This chapter describes the decisions you need to make and the steps to install Netscape/Red Hat
Directory Server and configure LDAP-UX Client Services. This chapter contains the following
sections:
• Before You Begin (page 19).
• Summary of Installing and Configuring (page 20).
• Plan Your Installation (page 21).
• Install LDAP-UX Client Services on a Client (page 26).
• Configure Your Directory (page 27).
• Import Name Service Data into Your Directory (page 30).
• Configure the LDAP-UX Client Services (page 31).
• Configure the LDAP-UX Client Services with SSL or TLS Support (page 41).
• Configure LDAP-UX Client Services with Publickey Support (page 46).
• AutoFS Support (page 52).
• Verify the LDAP-UX Client Services (page 61).
• Configure Subsequent Client Systems (page 63).
• Download the Profile Periodically (page 64).
• Use r-command for PAM_LDAP (page 64).
2.1 Before You Begin
This section lists some things to keep in mind as you plan your installation.
• Use the configuration worksheet to record your decisions and other information you'll need
later for configuration in Configuration Worksheet (page 243).
• See the LDAP-UX Integration B.04.10 Release Notes (J4269-90065) at
http://docs.hp.com/hpux/internet for last-minute information.
• You must have an LDAP directory. You can obtain the Directory Server for HP-UX version
6.x or 7.x from your local HP sales office or www.hp.com and view the documentation at
http://docs.hp.com/en/internet.html.
• See the white paper Preparing Your Directory for HP-UX Integration at
http://docs.hp.com/hpux/internet for advice on how to set up and configure your directory
to work with HP-UX.
• Most examples here use the Netscape Directory Server for HP-UX version 6.x and assume
you have some knowledge of this directory and its tools, such as the Directory Console and
ldapsearch. If you have another directory, consult your directory's documentation for specific
information.
• For details on how to integrate LDAP-UX Client Services with Windows 2000/2003/2003 R2
Active Directory, please refer to LDAP-UX Client Services with Microsoft Windows Active
Directory Administrator's Guide (J4269-90064) at
http://docs.hp.com/hpux/internet/#LDAP-UX%20Integration.
• The examples use a base DN of o=hp.com for illustrative purposes.
2.1 Before You Begin 19