LDAP-UX Client Services B.04.00 Administrator's Guide

Chapter 2 9

2 Installing And Conﬁguring

LDAP-UX Client Services

This chapter describes the decisions you need to make and the steps to

install Netscape and conﬁgure LDAP-UX Client Services. This chapter

contains the following sections:

• “Before You Begin” on page 9.

• “Summary of Installing and Conﬁguring” on page 10.

• “Plan Your Installation” on page 12.

• “Install LDAP-UX Client Services on a Client” on page 20.

• “Conﬁgure Your Directory” on page 21.

• “Import Name Service Data into Your Directory” on page 25.

• “Conﬁgure the LDAP-UX Client Services” on page 27.

• “Conﬁgure the LDAP-UX Client Serivces with SSL Support” on

page 41.

• “Conﬁgure LDAP-UX Client Services with Publickey Support” on

page 46.

• “AutoFS Support” on page 55.

• “Verify the LDAP-UX Client Services” on page 68.

• “Conﬁgure Subsequent Client Systems” on page 72.

• “Download the Proﬁle Periodically” on page 74.

• “Use r-command for PAM_LDAP” on page 76.

Before You Begin

This section lists some things to keep in mind as you plan your

installation.

• Use the conﬁguration worksheet to record your decisions and other

information you’ll need later for conﬁguration in Appendix A,

“Conﬁguration Worksheet,” on page 183.

• See the LDAP-UX Integration B.04.00 Release Notes (J4269-90042)

at http://docs.hp.com/hpux/internet for last-minute information.

• You must have an LDAP directory. You can obtain the Netscape

Directory Server for HP-UX version 6.x from your local HP sales

ofﬁce or www.hp.com and view the documentation at

http://docs.hp.com/hpux/internet/#Netscape%20Directory%20Server.