User's Manual

5 Removing HP-UX KCM
This chapter discusses the procedure to remove HP-UX KCM.
To remove HPUX-KCM:
1. Verify whether HPUX-KCM is already installed by running the following command:
swlist l bundle | grep i kcm
If HPUX-KCM is already installed on the system, a message similar to the following is displayed:
HPUX-KCM A.01.00.00 HP-UX Kernel Cryptographic Module
2. Remove HPUX-KCM by running the following command:
swremove HPUX-KCM
12 Removing HP-UX KCM