HP-UX iSCSI Software Initiator Support Matrix (October 2011)

ManualsBrandsHP ManualsSoftwareHP-UX iSCSI (SCSI Over TCP/IP) Software

HP-UX iSCSI Software Initiator Support Matrix Page 1 of 2

HP-UX iSCSI Software

Initiator Revision

Supported Operating

System Versions

Supported Systems Required Patches Supported iSCSI Targets

Revision B.11.31.03b and

higher

HP-UX 11i v3, September

2007 or later

All HP Integrity and

HP 9000 Servers that

are supported with

HP-UX 11i v3

None. HP StorageWorks P4000 SAN Solutions

HP D2D backup systems:

D2D2502i SmartBuy Backup System, D2D2503i

SmartBuy Backup System, D2D2504i SmartBuy

Backup System,

D2D4004fc Backup System,

D2D4004i Backup System,

D2D4009fc Backup System,

D2D4009i Backup System,

D2D4112 Backup System

NetApp Devices:

iSCSI enabled R200,

FAS250, F800, and FAS900 series, FAS 3000

series, FAS 270/270C and FAS 6000 series,

FAS2000 series,

GF200 and GF900 series,

V3000 and V6000 series

Revision B.11.31.03

HP-UX 11i v3, September

2007 or later

All HP Integrity and

HP 9000 Servers that

are supported with

HP-UX 11i v3

None.

HP D2D backup systems:

D2D2502i SmartBuy Backup System, D2D2503i

SmartBuy Backup System, D2D2504i SmartBuy

Backup System,

D2D4004fc Backup System,

D2D4004i Backup System,

D2D4009fc Backup System,

D2D4009i Backup System,

D2D4112 Backup System

NetApp Devices:

iSCSI enabled R200,

FAS250, F800, and FAS900 series, FAS 3000

series, FAS 270/270C and FAS 6000 series,

FAS2000 series,

GF200 and GF900 series,

V3000 and V6000 series

Revision B.11.31.02

Revision B.11.31.01

HP-UX 11i v3, September

2007 or later

All HP Integrity and

HP 9000 Servers that

are supported with

HP-UX 11i v3

None.

Revision B.11.31.01

HP-UX 11i v3, February

2007

All HP Integrity and

HP 9000 Servers that

are supported with

HP-UX 11i v3

PHKL_36332

PHKL_36334

The following matrix will be useful if you are implementing HP's iSCSI Software Initiator (SCSI over TCP/IP) solution for HP-UX.

NetApp Devices:

iSCSI enabled R200,

FAS250, F800, and FAS900 series, FAS 3000

series, FAS 270/270C and FAS 6000 series,

FAS2000 series,

GF200 and GF900 series,

V3000 and V6000 series

HP-UX iSCSI Software Initiator Support Matrix - October 2011

Summary of content (2 pages)

PAGE 1
HP-UX iSCSI Software Initiator Support Matrix - October 2011 H HP-UX iSCSI Software Initiator Revision The following matrix will be useful if you are implementing HP's iSCSI Software Initiator (SCSI over TCP/IP) solution for HP-UX. Supported Operating System Versions Supported Systems Revision B.11.31.03b and HP-UX 11i v3, September All HP Integrity and higher 2007 or later HP 9000 Servers that are supported with HP-UX 11i v3 Required Patches None.
PAGE 2
HP-UX iSCSI Software Initiator Revision Supported Operating System Versions Supported Systems Required Patches Revision B.11.23.03c Revision B.11.23.03d Revision B.11.23.03e Revision B.11.23.03f HP-UX 11i v2 September All HP 9000 Series Servers 2004 or later All HP Integrity Servers PHCO_32912 PHKL_32855 Revision B.11.23.03a Revision B.11.23.03b HP-UX 11i v2 All HP Integrity Servers PHSS_30889 Revision B.11.11.03a Revision B.11.11.03b Revision B.11.11.03d Revision B.11.11.03e Revision B.11.11.