HP-UX iSCSI Software Initiator (iSCSI-00) B.11.31.03f Release Notes (Edition 1)
• The scsimgr port and node display values are in hex format.
The scsimgr command displays iSCSI port and node names in hex format instead of ASCII
format. Therefore, this information is not useful.
Corrective action: This issue will be corrected in a subsequent release of the scsimgr
command.
• iSCSI Software Initiator installation problems occur when upgrading HP-UX.
When performing an OE update from HP-UX 11i v2 to HP-UX 11i v3 using Update-UX, the
iSCSI product is not installed properly.
Corrective action: Remove and reinstall the iSCSI Software Initiator on HP-UX 11i v3 after the
update. This issue might be corrected in a subsequent release.
5 Compatibility and installation requirements
5.1 Required patches
None.
5.2 Operating system and version compatibility
This release is specific for HP-UX 11i v3.
5.3 Hardware requirements
This version of HP-UX iSCSI Software Initiator runs on HP Integrity and HP 9000 servers with the
HP-UX 11i v3 operating system.
Network interface cards (NICs) and network infrastructure components currently supported with
HP-UX 11i v3 are required. NICs with 1 Gigabit or greater transfer rates are strongly recommended.
6 Related information
The latest documentation for iSCSI is available in English at the following website:
www.hp.com/go/hpux-iSCSI-docs
Available documents include:
• HP-UX iSCSI Software Initiator Support Guide
• HP-UX iSCSI Software Initiator (iSCSI-00) Release Notes
• HP-UX iSCSI Software Initiator Support Matrix
7 Software availability in native languages
The HP-UX iSCSI Software Initiator product is available only in the English language.
8 Documentation feedback
HP is committed to providing documentation that meets your needs. To help us improve the
documentation, send any errors, suggestions, or comments to Documentation Feedback
(docsfeedback@hp.com). Include the document title and part number, version number, or the URL
when submitting your feedback.
5 Compatibility and installation requirements 5