HP-UX iSCSI Software Initiator B.11.31.02 Release Notes (September 2009)

HP-UX iSCSI Software Initiator Support Matrix
NOTE: The following support matrix reflects the support status of Revisions B.11.31.02 of the
HP-UX iSCSI Software Initiator, at the time these Release Notes were published. The HP-UX
iSCSI Software Initiator Support Matrix located at http://www.docs.hp.com, is regularly updated
with the latest support status on all supported revisions of this product.
Table 1-1 HP-UX iSCSI Software Initiator Support Matrix
Supported Targets
1
PatchesSupported
Systems
Supported
Operating System
Versions
HP-UX iSCSI Software
Initiator Revision
NetApp Devices: iSCSI enabled
R200, FAS250, F800, and FAS900
series, FAS 3000 series, FAS
270/270C, and FAS 6000 series
2
FAS2000 series
GF200 and GF900 series
V3000 and V6000 series
NoneAll HP Integrity
and HP 9000
Servers that are
supported with
HP-UX 11i v3
HP-UX 11i v3B.11.31.02
NetApp Devices:iSCSI enabled
R200, FAS250, F800, and FAS900
series, FAS 3000 series, FAS
270/270C, and FAS 6000 series
FAS2000 series
GF200 and GF900 series
V3000 and V6000 series
PHKL_36332
PHKL_36334
All HP Integrity
and HP 9000
Servers that are
supported with
HP-UX 11i v3
HP-UX 11i v3B.11.31.01
1 Information on additional iSCSI targets is available at: http://www.hp.com/products1/unixserverconnectivity/
mass_storage_devices.html
2 Detailed support information for NetApp products is available at: http://www.netapp.com/products/storage-systems/
enterprise-storage/index.html
Software Availability in Native Languages
HP-UX iSCSI Software Initiator information is only available in the English language.
8 HP-UX iSCSI Software Initiator Release Notes