HP-UX iSCSI Software Initiator B.11.11.03e and B.11.23.03e Release Notes (July 2005)

Table Of Contents

Chapter

HP-UX iSCSI Software Initiator Release Notes

Installation Requirements

Installation Requirements for the HP-UX iSCSI Software Initiator Revision

B.11.11.03e

The following patches, or any superseding patches, should be installed along with revision B.11.11.03e of the

HP-UX iSCSI Software Initiator. The absence of any of these patches will not prevent the HP-UX iSCSI

Software Initiator from executing correctly, but there will be problems, as detailed in“Known Problems and

Workarounds for the HP-UX iSCSI Software Initiator Revision B.11.11.03e” on page 6

• PHCO_27374

• PHCO_28319

• PHCO_ 29379

• PHCO_30850

• PHCO_33203

• PHCO_33205

• PHCO_33221

• PHCO_33226

• PHCO_33236

• PHCO_33237

• PHCO_33242

• PHCO_33327

• PHKL_27096

• PHKL_27321

• PHKL_28209

• PHKL_30510

• PHKL_ 30622

• PHNE_26939

• PHSS_30888

(Requires installation of the HP-UX 11i v1 Hardware Enablement bundle: HWE0406.)

Installation Requirements for the HP-UX iSCSI Software Initiator Revision

B.11.23.03e

The following patches, or any superseding patches, should be installed along with revision B.11.23.03e of the

HP-UX iSCSI Software Initiator. The absence of any of these patches will not prevent the HP-UX iSCSI

Software Initiator from executing correctly, but there will be problems, as detailed in“Known Problems and

Workarounds for the HP-UX iSCSI Software Initiator Revision B.11.23.03e” on page 7

• PHCO_32912

• PHKL_32855