Mobile IPv6 A.01.00 Administrator's Guide

Chapter 3

Getting Started with HP-UX Mobile IPv6

HP-UX Mobile IPv6 Deployment Overview

The following list is an overview of the process for deploying HP-UX Mobile IPv6. Use the references for each

step to get complete information:

Step 1. Install HP-UX Mobile IPv6 and the required dependencies on HP-UX systems that will be Home

Agents or Correspondent Nodes. Refer to Chapter 2, “Installing HP-UX Mobile IPv6,” on page 21,

for more information.

Step 2. Conﬁgure the Mobile IPv6 Correspondent Nodes. Refer to “Conﬁguring Mobile IPv6 Correspondent

Nodes” on page 87 for more information.

Step 3. Conﬁgure the Mobile IPv6 Home Agents. Refer to “Conﬁguring Mobile IPv6 Home Agents” on

page 88 for more information.

Step 4. Conﬁgure Dynamic Home Agent Address Discovery if desired. Refer to “Conﬁguring Dynamic

Home Agent Address Discovery” on page 89 for more information.

Step 5. Dynamically-conﬁgure and troubleshoot mip6mod using the mip6admin tool if needed. Refer to

Chapter 5, “Administering the Mobile IPv6 Kernel Module with the mip6admin Tool,” on page 63,

for more information.