HP-UX IPv6 Transport Administrator Guide HP-UX 11i v3 (5992-6426, May 2013)

protocols instead of being dropped. A
"Destination Unreachable" error message is
sent, when forwarding the error message
would have sent the message to an address
on the same tunnel from which the message
was received.
0 Suppresses ICMPv6 errors from being
reported, for compatibility with previous
versions of IPv6.
By default, ndd sets the value of the
ip6_icmp6_extended_errors tunable to 0.
When the IPv6Upgrade bundle is installed, the
bundle sets the value of the tunable to 1.
ip_igmp_version Controls the IGMP protocol version used by the
system. The values for this tunable are 2 and 3.
The default value is 2.
ip6_nd_temp_valid_lifetime Controls the upper limit of valid lifetime for IPv6
temporary addresses configured using router
advertisements.
ip6_nd_temp_preferred_lifetime Controls the upper limit of preferred lifetime for
IPv6 temporary addresses configured using router
advertisements.
ip6_nd_prefer_temp_address Controls the source address selection preference
to use an IPv6 temporary address instead of a
public IPv6 address.
ip6_nd_autoconf Controls IPv6 auto-configuration from the router
advertisement.
ip6_mld_compat_disable Controls compatibility with the old version of MLD.
ip6_mld_rv Specifies the MLD robustness variable.
ip6_mld_maxsrc Specifies the maximum source addresses in the
MLDv2 filter.
ip6_mld_v2_unsolicited_interval Specifies the MLDv2 unsolicited report interval.
ip6_mld_qri Specifies the MLD query response interval.
ip6_mld_status Displays a report of the MLD state.
ip_igmp_compat_disable Controls compatibility with old version of IGMP.
ip_igmp_rv Specifies the IGMP robustness variable.
ip_igmp_maxsrc Specifies the maximum source addresses in the
IGMPv3 filter.
IPv6 Transport 17