HP-UX IPSec Version A.03.02.02 Administrator's Guide HP-UX 11i version 2 and HP-UX 11i version 3 (762800-001, April 2014)

Table 18 Serviceguard Port Numbers and Protocols
ServiceProtocolsPort
Used for cluster subnet monitoring between cluster nodes.ICMP Type 8 (Echo)N/A
Used by the clog service as the destination port on cluster
nodes to receive requests from the SMH Management Agent.
TCPConfigurable clog port
Used for network probes by cluster configuration commands
between cluster nodes.
UDP9
SNMP agent. Used as the destination port on the cluster nodes
from the Serviceguard Manager system.
UDP161
SNMP traps. Used as the destination port on the Serviceguard
Manager system from the cluster nodes.
UDP162
Shell (remote shell). Used as the destination port on cluster
nodes to allow remote execution of the cmscancl command.
TCP514
Quorum Server. Used as the destination port on the Quorum
Server from the cluster nodes.
TCP1238
HA - Logical Volume Manager. Used as the destination port
between the cluster nodes.
TCP1476
Plug-in Serviceguard Manager. Used as the destination port
on cluster nodes from the SMH Management Station.
TCP, UDP2301
Plug-in Serviceguard Manager. Used as the destination port
on cluster nodes from the SMH Management Station.
TCP, UDP2381
HA Cluster Heartbeat (hacl-hb). Used as the destination port
between cluster nodes.
TCP, UDP5300
HA Cluster General Services (hacl-gs). Used as the destination
port between cluster nodes.
TCP5301
HA Configuration (ha-cfg). Used as destination ports between
cluster nodes.
TCP and UDP5302
These ports are also used as destination ports on the cluster
nodes for requests from Cluster Object Manager (COM)
nodes, and for Serviceguard remote command execution
requests.
HA Cluster Probe (hacl-probe). Used as the destination port
between cluster nodes.
TCP and UDP5303
TCP port 5303 is also used as the destination port on Cluster
Object Manager (COM) nodes for requests from COM clients.
HA Cluster Commands (hacl-local). Used as the destination
port between the cluster nodes.
TCP5304
HA Cluster Test (hacl-test). Used as the destination port
between cluster nodes.
TCP5305
HA Polling for cmappserver (hacl-poll). Used as the
destination port between cluster nodes.
TCP5315
HA Distributed Lock Manager (ha-dlm). Used as the
destination port between cluster nodes.
TCP5408
Serviceguard network probes. Used as the source and
destination port between cluster nodes.
TCPdynamic (49152-65535
by default)
NOTE: This list of Serviceguard services may not be exhaustive. New Serviceguard utilities may
be developed that use port numbers different from those listed above. You will need to add new
policies as appropriate to make sure that all Serviceguard utilities run properly.
Step 1: Configuring HP-UX Host IPsec Policies for Serviceguard 205