HP-UX IPSec Version A.03.00 Administrator's Guide

D HP-UX IPSec Configuration Examples
This appendix provides configuration examples for the following topologies:
• “Host to Host telnet” (page 206)
This section contains example ipsec_config batch files for encrypting and authenticating
all telnet traffic between two systems using dynamic keys and preshared keys for IKE
authentication.
• “Subnet ESP with Exceptions” (page 208)
This section contains an example ipsec_config batch file for an HP-UX IPSec closed
secure network that communicates with one system outside the network (Potato). All packets
to and from system Potato are secured, and all packets within the local network are secured,
except for ICMP packets, which pass in clear text.
• “Host to Gateway” (page 210)
This section contains an example ipsec_config batch file for an end system using an IPsec
tunnel to a gateway.
• “Autoconfiguration Clients” (page 211)
This section contains an example ipsec_config batch file for use with autoconfiguration
clients (clients with dynamically assigned IP addresses, such as IPv6 stateless
autoconfiguration clients, and DHCP and DHCPv6 clients).
NOTE: The addresses and keys in these examples are for illustrative purposes only.
205