HP-UX IPSec Version A.03.00 Administrator's Guide

field. This is the action taken by HP-UX IPSec. Match the transform configured for the IPsec
policy pass or discard ).
For more information on the ipsec_report command, refer to the ipsec_report(1M)
manpage.
7. Verify any entries in the bypass list.
Enter the following command:
ipsec_report -bypass
In addition, you can enter the following command and verify that none of the active host
IPsec policies include addresses in the bypass list:
ipsec_report -host
In addition, you can enter the following commands and verify that none of the active host
and gateway IPsec policies include addresses in the bypass list
ipsec_report -host
ipsec_report -gateway
Step 8: Committing the Batch File Configuration and Verifying Operation 109