HP-UX IPSec version A.02.01 Administrator's Guide

Quick Configuration Procedure and Tips
Step 5: Configuring HP-UX IPSec to Start Automatically
Chapter 384
Step 5: Configuring HP-UX IPSec to Start
Automatically
After you have verified your HP-UX IPSec configuration is properly
operating, you can configure HP-UX IPSec so that it starts automatically
at system startup time.
TIP HP recommends that you configure HP-UX IPSec to start automatically
at system startup time once you have a known, good HP-UX IPSec
configuration. This allows HP-UX IPSec to secure your system at all
times.
ipsec_config add startup Syntax
Use the following ipsec_config add startup syntax to configure
HP-UX IPSec to start automatically at system startup time:
ipsec_config add startup -autoboot ON
Refer to the ipsec_config_add (1M) manpage for complete syntax
information.