HP-UX IPSec version A.02.01 Administrator's Guide

Quick Configuration Procedure and Tips
Step 4: Committing the Batch File Configuration and Verifying Operation
Chapter 380
Step 4: Committing the Batch File
Configuration and Verifying Operation
Use the following procedure to verify the operation of your HP-UX IPSec
configuration.
1. Commit the batch file operations to the configuration database with
the following command:
ipsec_config batch
batch_file_name
2. Verify the contents of the configuration database with the following
command:
ipsec_config show all
3. Start HP-UX IPSec with following command:
ipsec_admin -start
4. Check the status of HP-UX IPSec using the following command:
ipsec_admin -status
You will see a display similar to the following:
----------------- IPSec Status Report -----------------
Time: Thu Dec 24 15:21:37 1998
secauditd program: Running and responding
secpolicyd program: Running and responding
ikmpd program: Running and responding
IPsec kernel: Up
IPsec Audit level: Error
IPsec Audit file:
/var/adm/ipsec/auditThu-Dec-24-15-21-49-1998.log
Max Audit file size: 100 KBytes
Level 4 tracing: None
-------------- End of IPSec Status Report -------------
During normal operation, the status of the secauditd, secpolicyd
and ikmpd programs will be Running and responding and the
status of the IPsec kernel will be Up.
5. Verify IPsec policies with Pass or Discard transforms.