HP-UX IPSec version A.02.01 Administrator's Guide

Configuring HP-UX IPSec
Step 4: Configuring Preshared Keys Using Authentication Records
Chapter 4 137
The DN consists of at least one of the following attributes:
CN=
commonName
C= country
O= organization
OU= organizationalUnit
The attributes are all optional, but you must specify at least one.
Separate multiple attributes using commas. The order of the attributes
is ignored and the DN is not case sensitive.
If there are spaces in the DN, you must enclose the DN in double quotes
(““). For example, “CN=host1,C=US,O=My Company,OU=Blue Lab”.
The values are defined as follows:
commonName : The commonName of the DN in printable string format.
Commas are not accepted as part of this value. The size of this value
must not exceed 64 bytes.
country : The two-character ISO 3166-1 code for the country listed in the
DN, for example US for United States of America. Commas are not
accepted as part of this value.
organization : The organization of the DN, for example
Hewlett-Packard. Commas are not accepted as part of this value. The
size of this value must not exceed 64 bytes.
organizationalUnit : The organizationalUnit for the DN, for example
Marketing. Commas are not accepted as part of this value. The size of
this value must not exceed 64 bytes.
Defaults: The address of the interface the local system uses to
communicate with the remote system for the ID value and the
appropriate IP address type (IPV4 or IPV6) for the ID type.
USER-FQDN User-Fully Qualified Domain Name
(User-FQDN) in SMTP format, such as
[e-mail].
X500-DN X.500 Distinguished Name (DN). The format
of the DN is described in the paragraphs that
follow.
Table 4-4 ID Types and Values (Continued)
ID Type ID Value