HP-UX IPSec version A.02.01 Administrator's Guide

Configuring HP-UX IPSec
Step 1: Configuring Host IPsec Policies
Chapter 4106
service_name The service_name is a character string that specifies a
network service. The ipsec_config utility will add a policy to the
configuration database with the appropriate port number and protocol,
as listed below. You cannot specify
service_name and protocol in the
same policy.
-protocol
protocol_id
The protocol_id is the value or name of the upper-layer protocol that
HP-UX IPSec uses in the address filter to select an IPsec policy for a
packet. You cannot specify protocol and a
service_name in the same
policy.
Table 4-1 ipsec_config Service Names
Service
Name
Port Protocol
DNS-TCP 53 TCP
DNS-UDP 53 UDP
FTP-DATA 20 TCP
FTP-CONTROL 21 TCP
HTTP-TCP 80 TCP
HTTP-UDP 80 UDP
NTP 123 UDP
REXEC 512 TCP
RLOGIN 513 TCP
RWHO 513 UDP
REMSH 514 TCP
REMPRINT 515 TCP
SMTP 25 TCP
TELNET 23 TCP
TFTP 69 UDP