HP-UX IPSec version A.02.00 Administrator's Guide

Configuring HP-UX IPSec
Step 1: Configuring Host IPSec Policies
Chapter 380
clear text (no transform) for the transport. See “Tunnel IPSec Policy
Configuration Example” on page 87 for the batch file entry used to
configure the tunnel IPSec policy my_host_host_tunnel.
The priority is 30 to ensure that HP-UX IPSec selects this policy instead
of the policies for telnet and the TCP port 50000 application when the
local system is communicating with 10.2.2.2.
add host to_orange -source 10.1.1.1 \
-destination 10.2.2.2 -pri 30 -tunnel my_host_host_tunnel \
-action PASS