HP-UX IPSec version A.02.00 Administrator's Guide

HP-UX IPSec and MC/ServiceGuard
Step 2: Configuring HP-UX Host IPSec Policies for MC/ServiceGuard
Chapter 8254
You must also configure HP-UX IPSec so it does not discard packets to
COM clients, as listed below.
Configure corresponding host IPSec policies on the COM clients as
appropriate.
Summary: MC/ServiceGuard Port Numbers and
Protocols
MC/ServiceGuard uses the following port numbers and protocols.
Source IP
Address
Destination
IP Address
Protocol
Source
Port
Destination
Port
COM system
address (or
wildcard)
COM client
address
TCP 0 5303
Table 8-1 MC/ServiceGuard Port Numbers and Protocols
Port Protocols Service
161 UDP SNMP agent. Used as the
destination port on the cluster
nodes from the ServiceGuard
Manager system.
162 UDP SNMP traps. Used as the
destination port on the
ServiceGuard Manager system
from the cluster nodes.
514 TCP Shell (remote shell). Used as the
destination port on cluster nodes
to allow remote execution of the
cmscancl command.
1238 TCP Quorum Server. Used as the
destination port on the Quorum
Server from the cluster nodes.