HP-UX IPSec version A.02.00 Administrator's Guide

Troubleshooting HP-UX IPSec
Troubleshooting Procedures
Chapter 5166
audit _level can be alert, error, warning, informative, or debug.
A selected audit level includes all the lower audit levels.
audit_directory is the fully-qualified path name for the audit
directory.
max_size is the maximum size for each audit file, in kilobytes. The range
is 1 - 4294967294.
Configuring Startup Audit Parameters
To set the audit parameters used every time HP-UX IPSec starts, modify
the startup record in the configuration database by entering a command
similar to the following:
ipsec_config add startup [-autoboot ON|OFF]
[-auditlvl
audit_level ] [-auditdir audit_directory ]
[-maxsize
max_size ] ...
audit _level can be alert, error, warning, informative, or debug.
A selected audit level includes all the lower audit levels.
audit_directory is the fully-qualified path name for the audit
directory.
max_size is the maximum size for each audit file, in kilobytes. The range
is 1 - 4294967294.
When you modify startup parameters in the configuration database, the
changes do not take effect until the next time HP-UX IPSec starts.
The startup configuration object includes other operating parameters.
Any parameters you do not specify are re-set to the default values,
including the autoboot flag, which determines if HP-UX IPSec starts
automatically at system startup time. To configure HP-UX IPSec to start
automatically at system startup time, include the option -autoboot ON
in the ipsec_config add startup command.
Viewing Audit Files
You must use the ipsec_report utility to view audit files.
First, determine the current audit file:
ipsec_admin -status
Then use the -audit option of ipsec_report to display the file: