HP-UX IPSec version A.02.00 Administrator's Guide

Using Certificates with HP-UX IPSec
Using VeriSign Certificates
Chapter 4 121
• Hostname of the proxy server
• Port number on which the proxy server receives internal
requests
• User name for the proxy server, if the proxy server requires user
name and password authentication
• Password for the proxy server, if the proxy server requires user
name and password authentication
Step 2: Configuring Web Proxy Server Parameters
If you need to use a web proxy server to access the VeriSign Managed
PKI Control Center, use the following procedure to configure web proxy
server information for ipsec_mgr.
1. Start ipsec_mgr, the IPSec Manager configuration GUI. Enter the
following command from the HP-UX prompt:
ipsec_mgr
Do not run ipsec_mgr as a background process. The ipsec_mgr
prompts for the HP-UX IPSec password before starting the GUI.
If no password has been set, you must create one using the
ipsec_admin -newpasswd command. See Chapter 2, “Step 3: Setting
the HP-UX IPSec Password” on page 55 for instructions.
Using a Remote Display Device
The ipsec_mgr configuration GUI requires a graphical display
device. If you are using a remote graphical display device, be sure
that you:
• Set the DISPLAY environment variable to your display device. For
example, if you are using the KORN shell, the command is:
export DISPLAY=
display_device :0.0
• Execute the ipsec_mgr program from the system console.
2. Click on the Options menu. Select System, then Proxy
Information.