HP-UX IPSec version A.02.00 Administrator's Guide

Configuring HP-UX IPSec
Step 8: Committing the Batch File Configuration and Verifying Operation
Chapter 3 105
Step 8: Committing the Batch File
Configuration and Verifying Operation
Use the following procedure to verify your installation of HP-UX IPSec.
1. Commit the batch file operations to the configuration database with
the following command:
ipsec_config batch
batch_file_name
2. Verify the contents of the configuration database with the following
command:
ipsec_config show all
The ipsec_config utility displays the contents of the configuration
database. The contents include the configuration parameters
supplied by the profile file, and configuration records automatically
generated by ipsec_config, such as records for default policies and
one for startup options. The host and gateway IPSec policies are
sorted in priority order. You will see an output similar to the
following:
startup
-autoboot OFF
-auditlvl ERROR
:
:
host telnet_from_K
-source 0.0.0.0/0/23
-destination 192.6.2.55/32/0
-protocol 6
-priority 20
-action ESP_3DES_HMAC_SHA1/28800/0
-flags EXCLUSIVE
host default
-action PASS
3. Start HP-UX IPSec with following command:
ipsec_admin -start
4. Check the status of HP-UX IPSec using the following command: