HP-UX IPFilter Version A.03.05.14 Administrator's Guide

Installing and Configuring HP-UX IPFilter
Step 6: Verifying the Installation and Configuration
Chapter 114
Additional Configuration Information
IPFilter provides additional configuration options, such as the following
ndd variables.
NOTE The previous ndd variables cannot be set through
/etc/rc.config.d/nddconf. So, when IPFilter starts up, these ndd
variables will have their default values.
Name Description
Default
Value
ipl_buffer_sz Size of the IPFilter logging buffer for
/dev/ipl.
8K
ipl_suppress If set, does not print identical log
records separately, but counts them
as Nx, where N is the number of
times the log record occurs.
1
ipl_logall If set, the entire packet is logged.
Otherwise, only the first 128 bytes
are logged. This should be used with
the log body rules.
0
cur_iplbuf_sz Tells the size of the log buffer and the
amount of buffer space being used.
None