HP-UX IPFilter A.03.05.13 Administrator's Guide: HP-UX 11i v3
Table Of Contents
- HP-UX IPFilter Version A.03.05.13 Administrator's Guide
- Legal Notices
- Table of Contents
- Preface: About This Document
- 1 Installing and Configuring HP-UX IPFilter
- Overview of HP-UX IPFilter Installation
- Step 1: Checking HP-UX IPFilter Installation Prerequisites
- Step 2: Loading HP-UX IPFilter Software
- Step 3: Determining the Rules for IPFilter
- Step 4: Adding Rules to the Rules Files
- Step 5: Loading IPFilter and NAT Rules
- Step 6: Verifying the Installation and Configuration
- Kernel Tunable Parameters
- Supported and Unsupported Interfaces
- Troubleshooting HP-UX IPFilter
- 2 HP-UX IPFilter on HP-UX 11i Version 3
- 3 Rules and Keywords
- IPFilter Configuration Files
- Basic Rules Processing
- IPFilter Keywords
- pass and block: Controlling IP Traffic
- in and out: Bidirectional Filtering
- quick: Optimizing IPFilter Rules Processing
- on: Filtering by Network Interfaces
- from and to: Filtering by IP Addresses and Subnets
- log: Tracking Packets on a System
- proto: Controlling Specific Protocols
- opt and ipopts: Filtering on IP Options
- icmp-type: Filtering ICMP Traffic by Type
- port: Filtering on TCP and UDP Ports
- keep state: Protecting TCP, UDP, and ICMP Sessions
- flags: Tight Filtering Based on TCP Header Flags
- keep frags: Letting Fragmented Packets Pass
- with frags: Dropping Fragmented Packets
- with short: Dropping Short Fragments
- return-rst: Responding to Blocked TCP Packets
- return-icmp: Responding to Blocked ICMP Packets
- dup-to: Drop-Safe Logging
- NAT Keywords
- 4 Dynamic Connection Allocation
- 5 Firewall Building Concepts
- Blocking Services by Port Number
- Using Keep State
- Using Keep State with UDP
- Using Keep State with ICMP
- Logging Techniques
- Improving Performance with Rule Groups
- Localhost Filtering
- Using the to
- Creating a Complete Filter by Interface
- Combining IP Address and Network Interface Filtering
- Using Bidirectional Filtering Capabilities
- Using port and proto to Create a Secure Filter
- 6 HP-UX IPFilter Utilities
- 7 HP-UX IPFilter and FTP
- 8 HP-UX IPFilter and RPC
- 9 HP-UX IPFilter and IPSec
- 10 HP-UX IPFilter and Serviceguard
- A HP-UX IPFilter Configuration Examples
- B HP-UX IPFilter Static Linking
- C Performance Guidelines
- Index
HP-UX IPFilter Configuration Examples
BASIC.NAT
Appendix A170
BASIC.NAT
#!/sbin/ipnat -f -
#
# THIS EXAMPLE IS WRITTEN FOR IP FILTER 3.3
#
# ppp0 - (external) PPP connection to ISP, address a.b.c.d/32
#
# lan0 - (internal) network interface, address w.x.y.z/32
#
# If only one valid IP address from the ISP, then use this
# rule:
#
map ppp0 w.x.y.z/24 -> a.b.c.d/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.z/24 -> a.b.c.d/32
#
# If a different dialup IP address is assigned each time, then
# use this rule:
map ppp0 w.x.y.z/24 -> 0/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.z/24 -> 0/32
#
# If using a class C address space of valid IP addresses from
# an ISP, then use this rule:
#
map ppp0 w.x.y.z/24 -> a.b.c.d/24 portmap tcp/udp 40000:60000
map ppp0 w.x.y.z/24 -> a.b.c.d/24
#
# If using a small number of PCs, use this rule:
#
map ppp0 w.x.y.v/32 -> a.b.c.E/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.v/32 -> a.b.c.E/32
map ppp0 w.x.y.u/32 -> a.b.c.F/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.u/32 -> a.b.c.F/32
map ppp0 w.x.y.t/32 -> a.b.c.G/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.t/32 -> a.b.c.G/32
map ppp0 w.x.y.s/32 -> a.b.c.H/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.s/32 -> a.b.c.H/32
map ppp0 w.x.y.r/32 -> a.b.c.I/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.r/32 -> a.b.c.I/32
map ppp0 w.x.y.q/32 -> a.b.c.J/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.q/32 -> a.b.c.J/32
map ppp0 w.x.y.p/32 -> a.b.c.K/32 portmap tcp/udp 40000:60000
map ppp0 w.x.y.p/32 -> a.b.c.K/32
#