HP-UX Internet Express Version A.17.00 Read Before Installing or Updating HP-UX 11i Version 3 (5900-1843, August 2011)

Installing HP-UX Internet Express

This section describes the installation process for HP-UX Internet Express.

NOTE: If you are installing an HP-UX Internet Express component for the first time, HP recommends

uninstalling any previously loaded versions of the open source products.

To install HP-UX Internet Express, follow these steps:

1. To install HP-UX Internet Express components from Internet Express CD/DVD on systems currently

running HP-UX 11i v1, follow these steps:

a. Install the patches PHKL_26269, PHKL_28025, and PHCO_25841 to enable long filename

support. You can download these patches from any of the following locations:

• The GOLDBase11i bundle on the Support Plus CD (June 2003 or later) for HP-UX

11i v1

• The IT Resource Center Web site at http://itrc.hp.com.

b. Insert the CD into the drive.

NOTE: While mounting the HP-UX Internet Express CD/DVD, you must invoke the mount

command using the -orr option to recognize and read long filenames.

c. Mount the CD on your system. The parameters for mounting your CD-ROM may vary. An

example command for mounting the HP-UX Internet Express CD/DVD is as follows:

mount -orr /dev/dsk/c1t1d1 <depot-path>

The <depot-path> entry must be an empty directory. If you are installing HP-UX Internet

Express components from HP Software Depot, go to https://h20392.www2.hp.com/

portal/swdepot/displayProductInfo.do?productNumber=HPUXIEXP1131 and download

the <component-name>.depot files.

2. To view the list of bundles on the CD or in the download directory, enter the following

command:

$ swlist -l bundle -s <depot-path>

Bundle tag, version numbers, and brief descriptions of the components contained in the bundles

are displayed.

HP-UX Internet Express version A.17.00 contains all the components in four bundles. Table 2

lists the bundle names and the minimum disk space required for installing each bundle.

Table 2 HP-UX Internet Express A.17.00 bundle names

Required disk spaceBundle name

589 MBinternet

477 MBsecurity

329 MBweb1

1.3 GBweb2

3. To install HP-UX Internet Express components, follow these steps:

a. Enter the following swinstall command:

$ swinstall -s <depot-path>

The swinstall GUI displays.

b. On the swinstall GUI, select the component or components you want to install from

the list.

c. On the Actions menu, select Install. The swinstall program checks your system to be

sure the products will install successfully.