HP-UX Internet Express A.13.00 Product Overview Guide

2 Installing HP-UX Internet Express
This chapter describes the installation process for HP-UX Internet Express and provides
a brief overview of the Webmin web-based administration tool, which can be used to
configure select Internet Express components.
Prerequisites
Prior to installing HP-UX Internet Express, note the following recommendations and
requirements.
• If you are installing an HP-UX Internet Express product for the first time, HP
recommends uninstalling any previously loaded versions of the open source
products.
• If you want to install Tripwire A.13.00-2.4.1.2.001, ensure that PHSS_28871 is
installed in your system.
Installing HP-UX Internet Express
Follow these steps to install HP-UX Internet Express:
1. If you are installing HP-UX Internet Express components from the HP-UX Internet
Express CD/DVD, complete the following steps:
a. Insert the HP-UX Internet Express CD/DVD into the CD drive.
NOTE: While mounting the HP-UX Internet Express CD/DVD, you must
invoke the mount command using the -orr option to recognize and read
long filenames.
b. Mount the Internet Express CD/DVD on your system. The parameters for
mounting your CD/DVD may vary. An example command for mounting the
HP-UX Internet Express CD/DVD is as follows:
$ mount -orr /dev/dsk/c0t0d0<depot-path>
The <depot-path> must be an empty directory.
2. If you are installing HP-UX Internet Express components from HP Software Depot,
see http://www.hp.com/go/softwaredepot and download the
<component-name>.depot files to install.
3. View the list of bundles on the CD/DVD by entering the following command:
$ swlist -l bundle -s<depot-path>
This command shows each bundle tag, version number, and a brief description of
the product contained in the bundle.
Prerequisites 23