Command Reference Guide

Administration Commands
define_ip_dlc
2.31 define_ip_dlc
The define_ip_dlc command defines a new DLC for use with Enterprise Extender (HPR/IP). The command
can also be used to modify an existing DLC, if the DLC is not currently active.
2.31.1 Supplied Parameters
Parameter name Type Length Default
[define_ip_dlc]
dlc_name character 8
description character 31 (null string)
initially_active constant YES
udp_port_llc decimal 12000
udp_port_network decimal 12001
udp_port_high decimal 12002
udp_port_medium decimal 12003
udp_port_low decimal 12004
ip_precedence_llc decimal 6
ip_precedence_network decimal 6
ip_precedence_high decimal 4
ip_precedence_medium decimal 2
ip_precedence_low decimal 1
no_dns_lookup constant NO
Supplied parameters are:
dlc_name
Name of the DLC. This name is a character string using any locally displayable characters.
description
A text string describing the DLC. SNAplus2 uses this string for information only. It is stored in the node’s
configuration file and returned on the query_dlc command.
initially_active
Specifies whether this DLC is automatically started when the node is started. Possible values are:
YES
The DLC is automatically started when the node is started.
NO
The DLC is automatically started only if a port or LS that uses the DLC is defined as initially active;
otherwise, it must be manually started.
udp_port_llc
UDP port number used for LLC commands.
udp_port_network
UDP port number used for network priority traffic.
udp_port_high
UDP port number used for high priority traffic.
udp_port_medium
UDP port number used for medium priority traffic.
99