Command Reference Guide

Administration Commands
define_cos
description character 31 (null string)
transmission_priority constant LOW
{cos_tg_row}
min_effect_cap decimal 0
min_connect_cost decimal 0
min_byte_cost decimal 0
min_security constant SEC_NONSECURE
min_prop_delay constant PROP_DELAY_LAN
min_user_def_parm_1 decimal 0
min_user_def_parm_2 decimal 0
min_user_def_parm_3 decimal 0
max_effect_cap hex 1 0xFF
max_connect_cost decimal 255
max_byte_cost decimal 255
max_security constant SEC_GUARDED_RADIATION
max_prop_delay constant PROP_DELAY_MAXIMUM
max_user_def_parm_1 decimal 0
max_user_def_parm_2 decimal 0
max_user_def_parm_3 decimal 0
weight decimal
(Up to eight
cos_tg_row subrecords can be included, in ascending order of weight.)
{cos_node_row}
min_rar decimal 0
min_status constant UNCONGESTED
max_rar decimal 255
max_status constant CONGESTED
weight decimal
(Up to eight
cos_node_row subrecords can be included, in ascending order of weight.)
Supplied parameters are:
cos_name
Class of service name. This name is a type-A character string starting with a letter.
description
A text string describing the COS. SNAplus2 uses this string for information only. It is stored in the node’s
configuration file and returned on the
query_cos command.
transmission_priority
Transmission priority. Possible values are:
LOW
The session using this COS is given low priority.
MEDIUM
The session using this COS is given medium priority.
HIGH
The session using this COS is given high priority.
NETWORK
The session using this COS is given the highest priority.
The following subrecord contains additional parameters:
cos_tg_row
Each TG row contains a set of minimum TG characteristics, a set of maximum TG characteristics, and a
weight. When computing the weights for a TG, its characteristics are checked against the minimum and
65