Command Reference Guide

Administration Commands
status_lu62
Parameter Check
No parameter errors occur for this command.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands,
occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.202 status_lu62
The status_lu62 command returns information about the status of dependent and independent LUs of type 6.2.
2.202.1 Supplied Parameters
[status_lu62]
No parameters are supplied for this command.
2.202.2 Returned Information
The returned information includes a session count for each combination of local LU, partner LU, and mode that
is currently active or has been active since the node was started. The Machine parameter displays name of the
computer where the transaction program (TP) that is the target for any incoming attaches is running. The following
example illustrates the information returned for the status_lu62 command.
Example 2–7 Returned Information for the status_lu62 Command
--------------------------------------------------------------------------------
LU name LU Alias Machine Partner LU Mode Session count
--------------------------------------------------------------------------------
GEORGE GEORGE Inactive
FRED FALIAS mynode APPN.AS400 CPSVGMGR 2 Sessions
APPN.AS400 MODE1 Inactive
APPN.BOB MODE2 4 Sessions
--------------------------------------------------------------------------------
2.202.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
No parameter errors occur for this command.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands,
occur for this command.
614