Command Reference Guide

ManualsBrandsHP ManualsSoftwareHP HP-UX Internet and Networking Software

571

572

573

574

575

576

577

578

579

580

Administration Commands

reset_session_limit

2.182.1 Supplied Parameters

Parameter name Type Length

[reset_session_limit]

lu_name character 8 (null string)

lu_alias character 8 (null string)

plu_alias character 8 (null string)

fqplu_name character 17 (null string)

mode_name character 8 (null string)

mode_name_select constant ONE

set_negotiable constant NO

responsible constant SOURCE

drain_source constant NO

drain_target constant NO

force constant NO

Supplied parameters are:

lu_name

LU name of the local LU. This name is a type-A character string. To indicate that the LU is identi

ﬁed by its

LU alias instead of its LU name, do not specify this parameter.

lu_alias

LU alias of the local LU. This alias is a character string using any locally displayable characters. It is used

only if

lu_name is not speciﬁed.

If lu_name and lu_alias are not speciﬁed, the command is forwarded to the LU associated with the CP (the

default LU).

plu_alias

LU alias of the partner LU. This alias is a character string using any locally displayable characters. To

indicate that the partner LU is deﬁned by its fully qualiﬁed LU name instead of its LU alias, do not specify

this parameter.

fqplu_name

Fully qualiﬁed name of the partner LU. Specify 3–17 type-A characters that consist of a 1–8 character network

name, followed by a period, followed by a 1–8 character partner LU name. For the network name and partner

LU name, use only letters, digits

0–9, and special characters $, #, and @.

This parameter is used only if the plu_alias parameter is not speciﬁed; it is ignored if plu_alias is speciﬁed.

mode_name

Name of the mode for which to reset session limits. This parameter is a type-A character string starting with

a letter. It is ignored if mode_name_select is set to ALL.

mode_name_select

Selects whether session limits should be reset on a single speciﬁed mode, or on all modes between the local

and partner LUs. Possible values are:

ONE

Reset session limits on the mode speciﬁed by mode_name.

ALL

Reset session limits on all modes.

set_negotiable

Speciﬁes whether to reset the maximum negotiable session limit for this LU-LU-mode combination

to 0. (The current limit may be the limit speciﬁed for the mode, or may have been changed by

initialize_session_limit or change_session_limit.) Possible values are:

575