Command Reference Guide

Administration Commands
query_trace_type
If no path is included, the file is stored in the default directory for diagnostics files, /var/opt/sna.Ifa
path is included, this path is either a detailed path (starting with a
[/]
character) or a path relative to the default
directory.
2.178.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
No parameter errors occur for this command.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands,
occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.179 query_trace_type
The query_trace_type command returns information about the current tracing options for SNAplus2 kernel
components. For more information about tracing options, refer to HP-UX SNAplus2 Diagnostics Guide.
This command does not return information about DLC line tracing. To obtain information about DLC line tracing,
use the query_dlc_trace command.
This command must be issued to a running node.
2.179.1 Supplied Parameters
[query_trace_type]
No parameters are supplied for this command.
2.179.2 Returned Parameters
Parameter name Type
trace_flags constant
truncation_length decimal
If the command executes successfully, SNAplus2 returns the following parameters:
trace_flags
The types of tracing currently active. For more information about these trace types, refer to HP-UX SNAplus2
Diagnostics Guide.
If tracing is set for all types, one of the following values is returned:
NONE
568