Command Reference Guide

Administration Commands
query_trace_file
stderr
Full path name of standard error file or device.
env
Environment variables required by the TP in the form VARIABLE = VALUE.
2.177.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
INVALID_TP_NAME
The tp_name parameter specified did not match the name of a defined TP.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands,
occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.178 query_trace_file
The query_trace_file command returns information about the files that SNAplus2 uses to record trace data.
This command may be issued to a running node or (for client-server trace files only) to a HP-UX client computer
on which the SNAplus2 software is running. To issue the command to a client computer, use the
snapadmin program
on the client computer without specifying a node name.
On Windows clients, tracing is controlled by options in the Windows Registry(Win32 clients) or in the sna.ini
file (Win16 clients). For more information, refer to HP-UX SNAplus2 Diagnostics Guide.
2.178.1 Supplied Parameters
Parameter name Type Length Default
[query_trace_file]
trace_file_type constant IPS
Supplied parameter is:
trace_file_type
The type of trace file for which information is required. Possible values are:
566