Command Reference Guide

Administration Commands
query_statistics
sims_out decimal
rims_in decimal
rims_out decimal
snrm_in decimal
snrm_out decimal
dm_in decimal
dm_out decimal
disc_in decimal
disc_out decimal
ua_in decimal
ua_out decimal
If the command executes successfully, the following parameters are returned:
index
The index value used internally by SNAplus2 to identify the port that owns this LS.
address
The poll address of the secondary link station.
blus_in
The total number of basic link units (frames) received from the adjacent link station.
blus_out
The total number of basic link units (frames) transmitted to the adjacent link station.
octets_in
The total number of bytes, not including frame check sequences (FCSs), received from the adjacent link
station.
octets_out
The total number of bytes, not including FCSs, transmitted to the adjacent link station.
polls_out
The total number of polls sent to the adjacent link station.
poll_rsps_out
The total number of polls responded to by the adjacent link station.
local_busies
The total number of times the local link station has entered the receive not ready busy state (RNR).
remote_busies
The total number of times the remote link station has entered the busy state of receive not ready (RNR).
iframes_in
The total number of I-frames received from the adjacent link station (including retries and out-of-order frames).
iframes_out
The total number of I-frames transmitted to the adjacent link station (including retries and out-of-order frames).
retransmits_in
The total number of retransmissions of I-frames from the adjacent link station.
retransmits_out
The total number of retransmissions of I-frames to the adjacent link station.
ioctets_in
541