Command Reference Guide

Administration Commands
deactivate_conv_group
lu_alias
LU alias of the local LU. This alias is a character string using any locally displayable characters. This
parameter is used only if
lu_name is not specified.
If lu_name and lu_alias are not specified, the command is forwarded to the LU associated with the CP (the
default LU).
conv_group_id
Conversation group identifier for the session to be deactivated.
type
Type of deactivation. Possible values are:
DEACT_CLEANUP
Deactivate the session immediately, without waiting for a response from the partner LU.
DEACT_NORMAL
Do not deactivate the session until all conversations using the session have ended.
sense_data
If type is set to DEACT_CLEANUP, the sense_data parameter specifies the sense data to be used
when deactivating the session (specified as a 4-byte hexadecimal number preceded by 0x, for example
0x84000007). Otherwise, this parameter is not used.
2.6.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.6.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
DEACT_CG_INVALID_CGID
The conv_group_id parameter did not match any valid conversation group ID.
INVALID_CLEANUP_TYPE
The type parameter was not set to a valid value.
INVALID_LU_ALIAS
The lu_alias parameter did not match any defined LU alias.
INVALID_LU_NAME
The lu_name parameter did not match any defined LU name.
53