Command Reference Guide

Administration Commands
query_partner_lu
A 17-byte fully qualified network name of the partner LU.
description
A text string describing the partner LU, as specified in the definition of the partner LU.
act_sess_count
Total number of active sessions between the local LU and the partner LU.
partner_cp_name
Fully qualified network name for the CP associated with the partner LU. This parameter is not used if
partner_lu_located is set to NO.
partner_lu_located
Specifies whether the local node has located the CP where the partner LU is located. Possible values are:
YES
The partner LU has been located. The partner_cp_name parameter contains the CP name of the partner
LU.
NO
The partner LU has not yet been located. The partner_cp_name parameter is not used.
plu_un_name
Uninterpreted name of the partner LU.
parallel_sess_supp
Specifies whether parallel sessions are supported. Possible values are:
YES
Parallel sessions are supported.
NO
Parallel sessions are not supported.
conv_security
Specifies whether conversation security information supplied by a local TP can be sent to this partner LU.
Possible values are:
YES
Conversation security information supplied by a local TP can be sent to the partner LU.
NO
Conversation security information supplied by a local TP cannot be sent to the partner LU.
UNKNOWN
No sessions are active with the partner LU.
max_mc_ll_send_size
Maximum logical record size, in bytes, that can be sent to the partner LU. This can be in the range
1–32,767,
or
0
(zero) to indicate no limit (in which case the maximum logical record size is 32,767 bytes). Data records
that are larger than this are broken down into several LL records before being sent to the partner LU.
implicit
Specifies whether the entry was created by an implicit or explicit definition. Possible values are:
YES
The entry is an implicit entry.
499