Command Reference Guide

Administration Commands

change_session_limit

2.5 change_session_limit

The change_session_limit command requests SNAplus2 to change the session limits for a particular LU-

LU-mode combination. Sessions can be activated or deactivated as a result of processing this command.

This command must be issued to a running node.

2.5.1 Supplied Parameters

Parameter name Type Length Default

[change_session_limit]

lu_name character 8 (null string)

lu_alias character 8 (null string)

plu_alias character 8 (null string)

fqplu_name character 17 (null string)

mode_name character 8

set_negotiable constant NO

plu_mode_session_limit decimal

min_conwinners_source decimal 0

min_conwinners_target decimal 0

auto_act decimal 0

responsible constant SOURCE

Supplied parameters are:

lu_name

LU name of the local LU. This name is a type-A character string. To indicate that the LU is deﬁned by its

LU alias instead of its LU name, do not specify this parameter.

lu_alias

LU alias of the local LU. This alias is a character string using any locally displayable characters. It is used

only if

lu_name is not speciﬁed.

If lu_name and lu_alias are not speciﬁed, the command is forwarded to the LU associated with the CP (the

default LU).

plu_alias

LU alias of the partner LU. This alias is a character string using any locally displayable characters. To

indicate that the partner LU is deﬁned by its fully qualiﬁed LU name instead of its LU alias, do not specify

this parameter.

fqplu_name

Fully qualiﬁed name of the partner LU. Specify 3–17 type-A characters that consist of a 1–8 character network

name, followed by a period, followed by a 1–8 character partner LU name.

This parameter is used only if the plu_alias parameter is not speciﬁed; it is ignored if plu_alias is speciﬁed.

mode_name

Name of the mode to be used by the LUs. This name is a type-A character string starting with a letter.

set_negotiable

Speciﬁes whether the maximum negotiable session limit for this mode, as deﬁned by define_mode, should

be modiﬁed. Possible values are:

YES

Use the value speciﬁed by plu_mode_session_limit as the maximum negotiable session limit for this

LU-LU-mode combination.