Command Reference Guide

Administration Commands
query_node
hpr_support constant
ptf_flags constant
max_ls_exception_events decimal
max_compress_level constant
up_time decimal
nn_functions_supported constant
en_functions_supported constant
nn_status constant
nn_frsn decimal
nn_rsn decimal
def_ls_good_xids decimal
def_ls_bad_xids decimal
dyn_ls_good_xids decimal
dyn_ls_bad_xids decimal
dlur_release_level decimal
fq_nn_server_name character 17
current_isr_sessions decimal
nns_dlus_served_lu_reg_supp constant
nn_functions2 constant
branch_ntwk_arch_version decimal
If the command executes successfully, the following parameters are returned:
description
A text string describing the node, as specified in the definition of the node.
node_type
Type of node. Possible values are:
LEN_NODE
Low entry networking (LEN) node
END_NODE
APPN end node
NETWORK_NODE
APPN network node
BRANCH_NETWORK_NODE
APPN branch network node
fqcp_name
Fully qualified CP name of the node.
cp_alias
Locally used CP alias.
mode_to_cos_map_supp
Specifies whether the node provides mode-to-COS mapping. This parameter is ignored for a network node;
mode-to-COS mapping is always supported. For a LEN node, mode-to-COS mapping is not supported.
Possible values are:
YES
Mode-to-COS mapping is supported. A mode defined for this node must include its associated COS
name, which specifies either an SNA-defined COS or one defined using define_cos.
NO
Mode-to-COS mapping is not supported. Default COS names will be used.
482