Command Reference Guide

Administration Commands
query_nn_topology_tg
intersubnet_tg constant
cp_cp_session_active constant
branch_tg constant
multilink_tg constant
If the command executes successfully and you specified DETAIL as the list_options parameter value, the following
parameters are returned:
owner
Name of the node that owns the TG.
owner_type
Type of the node that owns the TG. Possible values are:
NETWORK_NODE
Network node (NN)
END_NODE
End node (EN)
VRN
Virtual routing node (VRN)
dest
Name of the destination node for the TG.
dest_type
Type of the destination node for the TG. Possible values are:
NETWORK_NODE
Network node (NN)
END_NODE
End node (EN)
VRN
Virtual routing node (VRN)
tg_num
Number associated with the TG.
frsn
Flow reduction sequence number indicating the last time that this resource was updated at the local node.
days_left
Number of days before this TG entry will be deleted from the Topology Database.
dlc_data
If dest_type or owner_type is VRN, this parameter specifies the DLC address of the connection to the VRN.
The number of bytes in the address depends on the DLC type. This parameter is not used otherwise.
For Token Ring, Ethernet, or FDDI, the address is in two parts: a 6-byte MAC address and a 1-byte local
SAP address. The bit ordering of the MAC address may not be in the expected format. For information about
converting between the two address formats, see Section 2.60.4, Bit Ordering in MAC Addresses.
rsn
Resource sequence number assigned by the network node that owns this resource.
478