Command Reference Guide

Administration Commands
query_lu_0_to_3
LU host attachment type.
When the command is issued to a running node, this parameter takes one of the following values:
DIRECT_ATTACHED
LU is directly attached to the host system.
DLUR_ATTACHED
LU is supported by DLUR on the local node.
DLUR
LU is supported by passthrough DLUR from a downstream node.
PU_CONCENTRATION
LU is supported by PU concentration from a downstream node.
2.142.3 Returned Parameters: Detailed Information
The detailed information that is returned varies slightly according to the type of application that is using the
LU. Section 2.142.3,
Returned Parameters: Detailed Information shows the parameters that are returned in every
case. Section 2.142.3, Returned Parameters: Detailed Information through Section 2.142.3, Returned Parameters:
Detailed Information show the returned parameters that depend on how the LU is being used.
Returned Parameters for All Application Types
The following parameters are returned for any LU that has been defined with a define_lu_0_to_3 command:
Parameter name Type Length
lu_name character 8
lu_sscp_sess_active constant
appl_conn_active constant
plu_sess_active constant
host_attachment constant
lu_sscp_rcv_ru_size decimal
lu_sscp_send_ru_size decimal
lu_sscp_max_send_btu_size decimal
lu_sscp_max_rcv_btu_size decimal
lu_sscp_max_send_pac_win decimal
lu_sscp_cur_send_pac_win decimal
lu_sscp_max_rcv_pac_win decimal
lu_sscp_cur_rcv_pac_win decimal
lu_sscp_send_data_frames decimal
lu_sscp_send_data_bytes decimal
lu_sscp_rcv_data_frames decimal
lu_sscp_rcv_data_bytes decimal
lu_sscp_sidh hex number
lu_sscp_sidl hex number
lu_sscp_odai constant
lu_sscp_ls_name character 8
plu_rcv_ru_size decimal
plu_send_ru_size decimal
plu_max_send_btu_size decimal
plu_max_rcv_btu_size decimal
plu_max_send_pac_win decimal
plu_cur_send_pac_win decimal
plu_max_rcv_pac_win decimal
plu_cur_rcv_pac_win decimal
plu_send_data_frames decimal
plu_send_data_bytes decimal
plu_rcv_data_frames decimal
435