Command Reference Guide

Administration Commands
query_lu_0_to_3
If the node is not running, this parameter is ignored; SNAplus2 returns information about all LUs regardless
of host attachment.
2.142.2 Returned Parameters: Summary Information
Parameter name Type Length
pu_name character 8
lu_name character 8
description character 31
nau_address decimal
lu_sscp_sess_active constant
appl_conn_active constant
plu_sess_active constant
host_attachment constant
If the command executes successfully and you specified SUMMARY as the list_options parameter value, the following
parameters are returned:
pu_name
Name of the local PU used by the LU.
lu_name
Name of the local LU.
description
A text string describing the LU, as specified in the definition of the LU.
nau_address
Network accessible unit address of the LU. This address is in the range
1–255.
lu_sscp_sess_active
Specifies whether the LU-SSCP session is active. Possible values are:
YES
The session is active.
NO
The session is inactive.
appl_conn_active
Specifies whether an application is using the LU. Possible values are:
YES
An application is using the LU.
NO
No application is using the LU.
plu_sess_active
Specifies whether the PLU-SLU session is active. Possible values are:
YES
The session is active.
NO
The session is inactive.
host_attachment
434