Command Reference Guide

Administration Commands
query_ls
DSPU_XID
Downstream PU. SNAplus2 includes XID exchange in link activation.
DSPU_NOXID
Downstream PU. SNAplus2 does not include XID exchange in link activation.
auto_act_supp
Specifies whether the link can be automatically activated when required by a session. Possible values are:
YES
The link can be automatically activated.
NO
The link cannot be automatically activated.
tg_number
Preassigned TG number, used to represent the link when the link is activated. This parameter is used only
if the adjacent node is an APPN node (
adj_cp_type is either
NETWORK_NODE
or END_NODE); it is ignored
otherwise. The value
0
(zero) indicates that the TG number is not preassigned and is negotiated when the
link is activated.
limited_resource
Specifies whether this link station is a limited resource and is automatically deactivated when there are no
sessions using the link. Link stations on a nonswitched port cannot be configured as limited resource. Possible
values are:
NO
The link is not a limited resource and is not automatically deactivated.
NO_SESSIONS
The link is a limited resource and is automatically deactivated when no active sessions are using it.
INACTIVITY
The link is a limited resource and is automatically deactivated when no active sessions are using it, or
when no data has flowed on the link for the time period specified by the link_deact_timer parameter.
solicit_sscp_sessions
Specifies whether to request the adjacent node to initiate sessions between the SSCP and the local CP and
dependent LUs. This parameter is not used for Enterprise Extender (HPR/IP) links.
This parameter is used only if the adjacent node is an APPN node (the adj_cp_type parameter is either
NETWORK_NODE
or END_NODE); it is ignored otherwise. If the adjacent node is a host (the adj_cp_type
parameter is either
HOST_XID3 or
HOST_XID0), SNAplus2 always requests the host to initiate SSCP sessions.
Possible values are:
YES
Request the adjacent node to initiate SSCP sessions.
NO
Do not request the adjacent node to initiate SSCP sessions.
pu_name
Name of the local PU that uses this link. This parameter is used only if adj_cp_type is set to
HOST_XID3 or
HOST_XID0,orifsolicit_sscp_sessions is set to YES. It is not used for Enterprise Extender (HPR/IP) links.
disable_remote_act
Specifies whether the LS can be activated by a remote node. Possible values are:
423