Command Reference Guide

Administration Commands
query_ls
The adjacent node type is unknown.
node_id
Node ID received from the adjacent node during XID exchange.
active_isr_count
Number of active intermediate sessions using this link.
active_lu_sess_count
Number of active LU-LU sessions using this link.
active_sscp_sess_count
Number of active PU-SSCP sessions using this link.
reverse_anr_label
The Reverse Automatic Network Routing (ANR) label for this link station.
local_address
The local address of this link station. For an Enterprise Extender (HPR/IP) link, this is shown as as a dotted-
decimal IP address (such as
193.1.11.100.
actual_max_send_btu_size
Negotiated maximum send BTU size.
description
A text string describing the LS, as specified in the definition of the LS.
port_name
Name of the port associated with this link station. If the link is to a virtual routing node (VRN), this parameter
specifies the name of the actual port used to connect to the VRN (as specified in the define_cn command).
adj_cp_name
Fully qualified name of the adjacent control point. This parameter is used only if
adj_cp_type specifies that
the adjacent node is an APPN node or a back-level LEN node.
adj_cp_type
Adjacent node type. Possible values are:
LEARN_NODE
APPN-capable node; the node type will be identified during XID exchange.
END_NODE
An End Node, a Branch Network Node acting as an End Node from the local node’s perspective, or a
LEN node that includes the Network Name CV in its XID3.
NETWORK_NODE
A Network Node, or a Branch Network Node acting as a Network Node from the local node’s
perspective.
BACK_LEVEL_LEN_NODE
Back-level LEN node (one that does not include the Network Name CV in its XID3).
HOST_XID3
Host node. SNAplus2 responds to a polling XID from the node with a format 3 XID.
HOST_XID0
Host node. SNAplus2 responds to a polling XID from the node with a format 0 XID.
422