Command Reference Guide

Administration Commands
query_ls
Enterprise Extender (HPR/IP)
state
State of this link station. Possible values are:
ACTIVE
The LS is active.
NOT_ACTIVE
The LS is not active.
PENDING_ACTIVE
The LS is being activated.
PENDING_INACTIVE
The LS is being deactivated.
PENDING_ACTIVE_BY_LR
The LS has failed (or an attempt to activate it has failed) and SNAplus2 is attempting to reactivate it.
act_sess_count
The total number of active sessions (both endpoint and intermediate) using the link.
det_adj_cp_name
Fully qualified name of the adjacent control point. This name is usually determined during activation; it is null
if the LS is inactive. However, for an LS to a back-level LEN node (specified by the
adj_cp_type parameter
on define_*_ls), this name is taken from the LS definition and is not determined during activation.
det_adj_cp_type
Type of the adjacent node. The node type is usually determined during activation; it is null if the LS is inactive.
However, for an LS to a back-level LEN node (specified by the adj_cp_type parameter on define_*_ls),
the node type is taken from the LS definition and is not determined during activation.
Possible values are:
LEARN_NODE
Node type is unknown or LS is inactive.
END_NODE
An End Node, a Branch Network Node acting as an End Node from the local node’s perspective, or a
LEN node that includes the Network Name CV in its XID3.
NETWORK_NODE
A Network Node, or a Branch Network Node acting as a Network Node from the local node’s
perspective.
VRN
Virtual routing node.
port_name
Name of the port associated with this link station.
adj_cp_name
Fully qualified name of the adjacent control point; this parameter is null for an implicit link.
adj_cp_type
Type of the adjacent control point. Possible values are:
LEARN_NODE
413