Command Reference Guide

Administration Commands
query_ls
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the ls_name parameter
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the ls_name parameter
ls_name
Link station name. This value is ignored if list_options is set to FIRST_IN_LIST.
port_name
Port name filter. To return information only on link stations associated with a specific port, specify the name
of the port. To return information about all link stations without filtering on the port name, do not specify
this parameter.
2.140.2 Returned Parameters: Summary Information
Parameter name Type Length
ls_name character 8
description character 31
dlc_type constant
state constant
act_sess_count decimal
det_adj_cp_name character 17
det_adj_cp_type constant
port_name character 8
adj_cp_name character 17
adj_cp_type constant
If the command executes successfully and you specified SUMMARY as the list_options parameter value, SNAplus2
returns the following parameters:
ls_name
Link station name.
description
A text string describing the LS, as specified in the definition of the LS.
dlc_type
Type of the DLC. Possible values are:
SDLC
Synchronous data link control
X25
X.25 QLLC (qualified link level control)
TR
Token Ring
ETHERNET
Ethernet
FDDI
Fiber distributed data interface
HPRIP
412