Command Reference Guide

Administration Commands
query_isr_session
rcv_data_bytes
Number of normal flow data bytes received.
rcv_fmd_data_bytes
Number of normal flow FMD data bytes received.
sidh
Session ID high byte.
sidl
Session ID low byte.
odai
Origin Destination Assignor Indicator. When bringing up a session, the sender of the BIND sets this field
to zero if the local node contains the primary link station, and sets it to one if the BIND sender is the node
containing the secondary link station.
ls_name
Link station name or name of the RTP connection associated with statistics. This is an 8-byte string in a locally
displayable character set. All 8 bytes are significant. This field can be used to correlate the intermediate
session statistics with a particular link station.
2.134.4 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_FQPCID
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied
name, but the pcid parameter value was not valid.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands,
occur for this command.
Function Not Supported
If the command does not execute because the node’s configuration does not support it, SNAplus2 returns the
following parameters:
primary_rc
INVALID_VERB
The local node is not a network node. This command can be used only at a network node.
secondary_rc
(This parameter is not used.)
396