Command Reference Guide

Administration Commands
query_isr_session
fqcp_name character 17
If the command executes successfully and you specified SUMMARY as the list_options parameter value, SNAplus2
returns the following parameters:
pcid
Procedure Correlator ID. This ID is an 8-byte hexadecimal string.
fqcp_name
Fully qualified CP name.
2.134.3 Returned Parameters: Detailed Information
Parameter name Type Length
pcid hex array 8
fqcp_name character 17
trans_pri constant
cos_name character 8
ltd_res constant
For each of the two sessions (primary and secondary), the following parameters are returned:
rcv_ru_size decimal
send_ru_size decimal
max_send_btu_size decimal
max_rcv_btu_size decimal
max_send_pac_win decimal
cur_send_pac_win decimal
send_rpc decimal
max_rcv_pac_win decimal
cur_rcv_pac_win decimal
rcv_rpc decimal
send_data_frames decimal
send_fmd_data_frames decimal
send_data_bytes decimal
send_fmd_data_bytes decimal
rcv_data_frames decimal
rcv_fmd_data_frames decimal
rcv_data_bytes decimal
rcv_fmd_data_bytes decimal
sidh hex number
sidl hex number
odai constant
ls_name (or rtp_name) character 8
rscv hex array 256
If the command executes successfully and you specified DETAIL as the list_options parameter value, SNAplus2
returns the following parameters:
pcid
Procedure Correlator ID. This ID is an 8-byte hexadecimal string.
fqcp_name
Fully qualified CP name.
trans_pri through ltd_res
394