Command Reference Guide

Administration Commands
query_dlc_trace
resource_name character 8
sidh hex byte
sidl hex byte
odai constant
message_type constant
If the command executes successfully, SNAplus2 returns the following parameters:
resource_type
The type of resource to be traced. Possible values are:
ALL_RESOURCES
The entry specifies tracing options for all resources.
DLC
The entry specifies tracing options for the DLC named in
resource_name and for all ports and link
stations that use this DLC.
PORT
The entry specifies tracing options for the port named in resource_name and for all link stations that
use this port.
LS
The entry specifies tracing options for the LS named in resource_name (or for a particular LFSID on
this LS).
RTP
The entry specifies tracing options for the RTP connection named in resource_name.
PORT_DEFINED_LS
The entry specifies tracing options for the port named in resource_name and for all defined link stations
(but not implicit link stations) that use this port.
PORT_IMPLICIT_LS
The entry specifies tracing options for the port named in resource_name and for all implicit link stations
(but not defined link stations) that use this port.
resource_name
The name of the DLC, port, LS, or RTP connection to be traced.
The following three parameters identify the Local Form Session Identifier for a session on the specified LS. This
LFSID is valid only if resource_type is set to
LS and indicates that only messages on this session are to be traced.
The LFSID consists of the following parameters:
sidh
Session ID high byte
sidl
Session ID low byte
odai
Origin Destination Assignor Indicator. Possible values are:
YES
The BIND sender is the node containing the secondary link station.
NO
The BIND sender is the node containing the primary link station.
354