Command Reference Guide

Administration Commands
query_cn
2.108.1 Supplied Parameters
Parameter name Type Length Default
[query_cn]
num_entries decimal 1
list_options constant LIST_INCLUSIVE
fqcn_name character 17 (null string)
Supplied parameters are:
num_entries
Maximum number of CNs for which data should be returned. You can specify 1 to return data for a specific
CN, a number greater than 1 to return data for multiple CNs, or 0 (zero) to return data for all CNs.
list_options
The position in the list of CNs from which SNAplus2 begins to return data.
Possible values are:
FIRST_IN_LIST
Start at the first entry in the list
LIST_INCLUSIVE
Start at the entry specified by the fqcn_name parameter
LIST_FROM_NEXT
Start at the entry immediately following the entry specified by the fqcn_name parameter
fqcn_name
Fully qualified name of the CN for which information is required, or the name to be used as an index into the
list of CNs. This value is ignored if list_options is set to FIRST_IN_LIST. Specify 3–17 type-A characters
consisting of a 1–8 character network name, followed by a period, followed by a 1–8 character CN name.
2.108.2 Returned Parameters
Parameter name Type Length
fqcn_name character 17
num_act_ports decimal
description character 31
num_ports decimal
effect_cap decimal
connect_cost decimal
byte_cost decimal
security constant
prop_delay constant
user_def_parm_1 decimal
user_def_parm_2 decimal
user_def_parm_3 decimal
If the command executes successfully, the following parameters are returned:
fqcn_name
Fully qualified name of the CN.
num_act_ports
The number of active ports on the connection network.
description
315